Features of Water Chiller

  1. High efficiency, cramped construction, small size, low noise, large cooling capacity, long lifespan, easy operation.
  2. Adopt widely used, high efficient, reliable and stable twin compressor. The cost of running and maintaining is greatly less than other types of chiller.
  3. The flooded evaporator enables the distribution of the refrigerant to be more even so that temperature pattern is optimized and the evaporating temperature is largely increased. Meanwhile, the heat exchange efficiency will be improved. Integrated with high performance and reliable compressor, the cooling capacity and EER is greatly improved.
  4. The unit is controlled by the microcomputer control system. Stepless capacity regulation is automatic based on the variation of load. The compressor will start at low load. Between the lowest load and the highest load, stepless capacity regulation is available. During the increase of the load, the output and the load maintain best matching so that highest efficiency and energy-saving running is realized.
  5. Safety protection functions include anti-phase protection, overload protection, antifreezing protection, high and low pressure alarm in chiller protection, exhaust high temperature protection, and water flow switch protection.
Water chiller blue yellow
EvaporatorInlet water temperature24℃7℃
Outlet water temperature15℃4℃
Differential temperature between Inlet and Outlet8℃2.5℃
CondenserInlet water temperature40℃18℃
Outlet water temperature45℃23℃
Differential temperature between Inlet and Outlet8℃3.5℃

Water-cooled chiller can be used for offering cool water of air conditioning system and integrating with terminal Industrial unit such as plastics Industrial and combined process water chiller to constitute various industrial chilling system. It can be used for chilled water in sites such Industrial cooling, process chilling, hotel, hospital, mall, office building and place of entertainment.

Specification of use range. If the inlet water temperature of evaporator is lower than the value shown in the above form, it is necessary to reselect the model. If the outlet water temperature of evaporator is lower than the value shown in the above form, it is necessary to add antifreeze into the circulating water system. So, the cold insulation of water chiller is important.

Leave a Comment

Your email address will not be published. Required fields are marked *